View TF0402B-04P-03_369418.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(1/13)
Common Mode Choke Coils(Line Filters) for AC Power Supply Conformity to RoHS Directive Toroidal Core Type TF Series
TDK common mode choke coils(line filters) are used in a wide range of prevention of electromagnetic interference(EMI) and radio frequency interference(RFI) from power supply lines and for prevention of multifunctioning of products such as measuring equipment and system equipment. FEATURES * Wide range of selection. * High impedance at applicable frequency. * High self-resonant frequency. PRODUCT IDENTIFICATION TF (1) (2) V-A (3) (4) Y (5) R (6) - 01 (7)
(1) Core shape TF: Toroidal core (2) Dimensional code Widthx Depth (3) External shape code V: Vertical type H: Horizontal type (4) High material (5) Inductance value Example) 133:13mH (6) Rated current value Example) 3R0:3.0A (7) Product management number SELECTION CHART
Series Configuration Type Inductance value min. Rated current (A) Handling power Lx I2(mHx A2) Weight (g)typ. Minimum package quantity (pieces/box) 960 560 460 440 240 960 550 380 320 280 700 320
Vertical type
TF Horizontal type
Vertical type (For high frequency)
TF1813V TF2518V TF2721V TF3020V TF3525V TF1713H TF2520H TF2722H TF3022H TF3526H TF2628V-1H TF3524V-1H
2 to 20mH 0.65 to 9mH 1 to 13mH 0.35 to 13mH 0.65 to 20mH 2 to 20mH 0.65 to 9mH 1 to 13mH 0.35 to 13mH 0.65 to 20mH 25 to 65H 25 to 120H
0.7 to 3.2 2.5 to 10 2.5 to 10 3 to 20 3 to 20 0.7 to 3.2 2.5 to 10 2.5 to 10 3 to 20 3 to 20 6 to 12 8 to 20
20 50 75 130 195 20 50 75 130 195 3.65 10.8
5 15 20 30 41 5.3 15 20 32 42 18 40
Handling power=(Inductance value)x (Current)2. It is possible to design within the range below this value. [Example] The coil for 2A can make even the inductance of 2.5mH or less a product for handling power 10.
* Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
* All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm
(2/13)
Horizontal Type TF Series
FEATURES * This series uses a high permeability toroidal ferrite core and therefore provide large inductance with a little number of turns. * Therefore its stray capacity is small and it keeps the impedance required to effectively suppress high frequency noises. * Products mounted on a base with fixed leads are easy to insert to circuit boards. TF1713H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
70.5
1 4
TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS
100 A203Y0R7 A153Y1R0
17.50.5
2
20max.
3
10
1 4
2
3
3.51
o0.7 17max.
Weight: 5.3g typ. Recommended hole diameter: o1.2 Dimensions in mm
Impedance (k)
13max.
1
A652Y1R6 A502Y2R0
A202Y3R2 0.1 0.01
0.1
1 Frequency (MHz)
10
100
ELECTRICAL CHARACTERISTICS (STANDARD LINE UP)
Part No. TF1713H-A203Y0R7-01 TF1713H-A153Y1R0-01 TF1713H-A652Y1R6-01 TF1713H-A502Y2R0-01 TF1713H-A202Y3R2-01 Inductance (mH)min. 20 15 6.5 5 2 DC resistance ()max. 0.73 0.44 0.19 0.14 0.065 Rated current Iac(A)max. 0.7 1 1.6 2 3.2
RATINGS
Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations.
* Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
TF1713H-A 960pieces/box
* All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm
(3/13)
TF2520H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
25max.
2
(11)
TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS
100 902Y2R5
3
25max.
(20)
10 Impedance (k)
Lot No. 20max.
1 1 2
4 4 3
1
702Y3R0 502Y4R0 252Y5R0 102Y8R0 651Y10R0
3.750.75
Weight: 15g typ. Recommended hole diameter: od+0.5 Dimensions in mm
0.1
0.01 0.01
0.1
1 Frequency (MHz)
10
100
ELECTRICAL CHARACTERISTICS (STANDARD LINE UP)
DC Inductance Part No. resistance (mH)min. ()max. TF2520H-A902Y2R5-01 9 0.12 TF2520H-A702Y3R0-01 7 0.095 TF2520H-A502Y4R0-01 5 0.075 TF2520H-A252Y5R0-01 2.5 0.05 TF2520H-A102Y8R0-01 1 0.025 TF2520H-A651Y10R0-01 0.65 0.02 Rated current Iac(A)max. 2.5 3 4 5 8 10 od (mm) 0.6 0.65 0.7 0.75 0.95 1
RATINGS
Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations.
* Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
TF2520H-A 550pieces/box
* All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm
(4/13)
TF2722H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
27max.
2
(11)
TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS
100 133Y2R5
3
27max.
(20)
10 Impedance (k)
Lot No. 22max.
1 1 2
4 4 3
1
103Y3R0 652Y4R0 422Y5R0 152Y8R0 102Y10R0
3.750.75
Weight: 20g typ. Recommended hole diameter: od+0.5 Dimensions in mm
0.1
0.01 0.01
0.1
1 Frequency (MHz)
10
100
ELECTRICAL CHARACTERISTICS (STANDARD LINE UP)
DC Inductance Part No. resistance (mH)min. (m)max. TF2722H-A133Y2R5-01 13 130 TF2722H-A103Y3R0-01 10 90 TF2722H-A652Y4R0-01 6.5 60 TF2722H-A422Y5R0-01 4.2 40 TF2722H-A152Y8R0-01 1.5 20 TF2722H-A102Y10R0-01 1 11 Rated current Iac(A)max. 2.5 3 4 5 8 10 od (mm) 0.65 0.7 0.8 0.9 1 1.2
RATINGS
Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations.
* Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
TF2722H-A 380pieces/box
* All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm
(5/13)
TF3022H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
30max.
2
(11)
3
TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS
100 133Y3R0
30max.
(24)
802Y4R0 10 Impedance (k) 602Y5R0
Lot No. 22max.
1 1 2
4 4 3
1 502Y6R0 402Y7R0 252Y8R0 172Y10R0 701Y15R0 351Y20R0
3.750.75
Weight: 32g typ. Recommended hole diameter: od+0.5 Dimensions in mm
0.1
0.01 0.01
0.1
1 Frequency (MHz)
10
100
ELECTRICAL CHARACTERISTICS (STANDARD LINE UP)
DC Inductance Part No. resistance (mH)min. ()max. TF3022H-A133Y3R0-01 13 0.1 TF3022H-A802Y4R0-01 8 0.07 TF3022H-A602Y5R0-01 6 0.05 TF3022H-A502Y6R0-01 5 0.04 TF3022H-A402Y7R0-01 4 0.035 TF3022H-A252Y8R0-01 2.5 0.025 TF3022H-A172Y10R0-01 1.7 0.015 TF3022H-A701Y15R0-01 0.7 0.007 TF3022H-A351Y20R0-01 0.35 0.005 Rated current Iac(A)max. 3 4 5 6 7 8 10 15 20 od (mm) 0.75 0.8 0.9 0.95 1 1.1 1.3 1.6 1.7
RATINGS
Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations.
* Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
TF3022H-A 320pieces/box
* All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm
(6/13)
TF3526H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
35max.
2
(11)
TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS
100 203Y3R0 123Y4R0 103Y5R0
3
33max.
(28)
10 Impedance (k)
Lot No. 26max.
1
4
1
702Y6R0 602Y7R0 452Y8R0 302Y10R 102Y15R 651Y20R0
1 2
4 3
0.1
3.750.75
Weight: 42g typ. Recommended hole diameter: od+0.5 Dimensions in mm 0.01 0.01 0.1 1 Frequency (MHz) 10 100
ELECTRICAL CHARACTERISTICS (STANDARD LINE UP)
DC Inductance Part No. resistance (mH)min. (m)max. TF3526H-A203Y3R0-01 20 130 TF3526H-A123Y4R0-01 12 75 TF3526H-A103Y5R0-01 10 55 TF3526H-A702Y6R0-01 7 45 TF3526H-A602Y7R0-01 6 35 TF3526H-A452Y8R0-01 4.5 25 TF3526H-A302Y10R0-01 3 18 TF3526H-A102Y15R0-01 1 6 TF3526H-A651Y20R0-01 0.65 4 Rated current Iac(A)max. 3 4 5 6 7 8 10 15 20 od (mm) 0.75 0.85 0.95 1 1.1 1.2 1.3 1.7 1.8
RATINGS
Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations.
* Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
TF3526H-A 280pieces/box
* All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm
(7/13)
Vertical Type TF Series
TF1813V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
16max.
TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS
100 A203Y0R7 A153Y1R0
3.51
o0.7 18max. 140.5
13max.
2
3
2
3
Weight: 5g typ. Recommended hole diameter: o1.2 Dimensions in mm
Impedance (k)
70.5
1
4
1
4
10
1
A652Y1R6 A502Y2R0
A202Y3R2 0.1 0.01
0.1
1 Frequency (MHz)
10
100
ELECTRICAL CHARACTERISTICS (STANDARD LINE UP)
Part No. TF1813V-A203Y0R7-01 TF1813V-A153Y1R0-01 TF1813V-A652Y1R6-01 TF1813V-A502Y2R0-01 TF1813V-A202Y3R2-01 Inductance (mH)min. 20 15 6.5 5 2 DC resistance ()max. 0.73 0.44 0.19 0.14 0.065 Rated current Iac(A)max. 0.7 1 1.6 2 3.2
RATINGS
Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations.
* Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
TF1813V-A 960pieces/box
* All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm
(8/13)
TF2518V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
1
18max. (10)
4
(13)
TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS
100 A902Y2R5
o25max.
2
1
3
10 Impedance (k)
4
27max.
L1
2
L2
3
3.750.75
1
Weight: 15g typ. od Recommended hole diameter: od+0.5 Dimensions in mm
A702Y3R0 A502Y4R0 A252Y5R0 A102Y8R0 A651Y10R0
0.1
0.01 0.01
0.1
1 Frequency (MHz)
10
100
ELECTRICAL CHARACTERISTICS (STANDARD LINE UP)
DC Inductance Part No. resistance (mH)min. ()max. TF2518V-A902Y2R5-01 9 0.12 TF2518V-A702Y3R0-01 7 0.095 TF2518V-A502Y4R0-01 5 0.075 TF2518V-A252Y5R0-01 2.5 0.05 TF2518V-A102Y8R0-01 1 0.025 TF2518V-A651Y10R0-01 0.65 0.02 Rated current Iac(A)max. 2.5 3 4 5 8 10 od (mm) 0.6 0.65 0.7 0.75 0.95 1
RATINGS
Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations.
* Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
TF2518V-A 560pieces/box
* All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm
(9/13)
TF2721V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
1
21max. (10)
TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS
100 133Y2R5
4
(15)
o27max.
2
3
Impedance (k)
10
1
4
28max.
L1
2
L2
3
1
103Y3R0 652Y4R0 422Y5R0 152Y8R0 102Y10R0
3.750.75
Weight: 20g typ. od Recommended hole diameter: od+0.5 Dimensions in mm
0.1
0.01 0.01
0.1
1 Frequency (MHz)
10
100
ELECTRICAL CHARACTERISTICS (STANDARD LINE UP)
DC Inductance Part No. resistance (mH)min. (m)max. TF2721V-A133Y2R5-01 13 130 TF2721V-A103Y3R0-01 10 90 TF2721V-A652Y4R0-01 6.5 60 TF2721V-A422Y5R0-01 4.2 40 TF2721V-A152Y8R0-01 1.5 20 TF2721V-A102Y10R0-01 1 11 Rated current Iac(A)max. 2.5 3 4 5 8 10 od (mm) 0.65 0.7 0.8 0.9 1 1.2
RATINGS
Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations.
* Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
TF2721V-A 460pieces/box
* All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm
(10/13)
TF3020V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
(10) 1 20max. 4 (15)
TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS
100 133Y3R0 802Y4R0 10 Impedance (k) 602Y5R0
o30max.
2
3
31max.
1
4
L1
2
L2
3
1 502Y6R0 402Y7R0 252Y8R0 172Y10R0 701Y15R0 351Y20R0
3.750.75
od
Weight: 30g typ. Recommended hole diameter: od+0.5 Dimensions in mm
0.1
0.01 0.01
0.1
1 Frequency (MHz)
10
100
ELECTRICAL CHARACTERISTICS (STANDARD LINE UP)
DC Inductance Part No. resistance (mH)min. ()max. TF3020V-A133Y3R0-01 13 0.1 TF3020V-A802Y4R0-01 8 0.07 TF3020V-A602Y5R0-01 6 0.05 TF3020V-A502Y6R0-01 5 0.04 TF3020V-A402Y7R0-01 4 0.035 TF3020V-A252Y8R0-01 2.5 0.025 TF3020V-A172Y10R0-01 1.7 0.015 TF3020V-A701Y15R0-01 0.7 0.007 TF3020V-A351Y20R0-01 0.35 0.005 Rated current Iac(A)max. 3 4 5 6 7 8 10 15 20 od (mm) 0.75 0.8 0.9 0.95 1 1.1 1.3 1.6 1.7
RATINGS
Item Rated voltage(V) Dielectric withstanding voltage(V) Insulation resistance (M) Temperature rise(C) Operating temperature range(C) Storage temperature range(C) Resistance to soldering tenperature1
1 2
Standard value 80 to 280 2000 100min. 45max. -20 to +120 -20 to +85
Conditions 50Hz/60Hz Between each winding for 1 minute Between each winding for DC.500V With line resistance Including self-temperature rise
2605C, 101sec Solder bath method 3505C, 5sec max. Soldering iron method
* Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
Pb free solder(Sn-3Ag-0.5Cu) However, this product is not recognized by each regulations.
PACKAGING QUANTITIES
TF3020V-A 440pieces/box
* All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm
(11/13)
TF3525V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
1
25max. (18)
TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS
100 203Y3R0 123Y4R0 103Y5R0
4
(16)
o35max.
2
3
Impedance (k)
10
1
4
35max.
L1
2
L2
3
1
702Y6R0 602Y7R0 452Y8R0 302Y10R0 102Y15R0 651Y20R0
3.750.75
Weight: 41g typ. od Recommended hole diameter: od+0.5 Dimensions in mm
0.1
0.01 0.01
0.1
1 Frequency (MHz)
10
100
ELECTRICAL CHARACTERISTICS (STANDARD LINE UP)
DC Inductance Part No. resistance (mH)min. (m)max. TF3525V-A203Y3R0-01 20 130 TF3525V-A123Y4R0-01 12 75 TF3525V-A103Y5R0-01 10 55 TF3525V-A702Y6R0-01 7 45 TF3525V-A602Y7R0-01 6 35 TF3525V-A452Y8R0-01 4.5 25 TF3525V-A302Y10R0-01 3 18 TF3525V-A102Y15R0-01 1 6 TF3525V-A651Y20R0-01 0.65 4 Rated current Iac(A)max. 3 4 5 6 7 8 10 15 20 od (mm) 0.75 0.85 0.95 1 1.1 1.2 1.3 1.7 1.8
RATINGS
Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations.
* Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
TF3525V-A 240pieces/box
* All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm
(12/13)
Vertical Type (For High Frequency) TF Series
FEATURES * This series is designed to reduce stray capacity between windings by using a single-layer coil construction on Ni-Zn ferrite cores, which offer excellent high frequency characteristics. * This series provides excellent noise suppression for high frequency ranges including the FM band. TF2628V-1H(VERTICAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
1
21max. (10)
4
(15)
TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS
10
o27max.
2
3
Impedance (k)
1
4
1
L1
2
L2
3
0.1
650Y6R0 450Y9R0 250Y12R0
28max.
Weight: 18g typ. 51 od Recommended hole diameter: od+0.5 Dimensions in mm
0.01
0.001 0.01
0.1
1 Frequency (MHz)
10
100
ELECTRICAL CHARACTERISTICS (STANDARD LINE UP)
Part No. TF2628V-650Y6R0-1H TF2628V-450Y9R0-1H TF2628V-250Y12R0-1H DC Inductance resistance (H)min. (m)max. 65 20 45 12 25 9 Rated current Iac(A)max. 6 9 12 od (mm) 0.8 1 1.2
RATINGS
Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations.
* Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=10kHz]
PACKAGING QUANTITIES
TF2628V-1H 700pieces/box
* All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm
(13/13)
TF3524V-1H(VERTICAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
1
25max. (18)
TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS
10
4
(16)
o35max.
2
3
Impedance (k)
1
1
4
35max.
0.1
L1
2
L2
3
121Y8R0 750Y12R0 450Y15R0 250Y20R0
Weight: 40g typ. 51 od Recommended hole diameter: od+0.5 Dimensions in mm
0.01
0.001 0.01
0.1
1 Frequency (MHz)
10
100
ELECTRICAL CHARACTERISTICS (STANDARD LINE UP)
Part No. TF3524V-121Y8R0-1H TF3524V-750Y12R0-1H TF3524V-450Y15R0-1H TF3524V-250Y20R0-1H Inductance (H)min. 120 75 45 25 DC resistance (m)max. 20 10 7 5 Rated current Iac(A)max. 8 12 15 20 od (mm) 1 1.3 1.6 1.8
RATINGS
Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations.
* Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=10kHz]
PACKAGING QUANTITIES
TF3524V-1H 320pieces/box
* All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm

▲Up To Search▲

Price & Availability of TF0402B-04P-03

	To Download TF0402B-04P-03 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .